Docklight - Info


Product Overview


Docklight RS232 Terminal / RS232 Monitor

Simulating serial protocols - Docklight can send out user-defined sequences according to the protocol used and it can react to incoming sequences. This makes it possible to simulate the behavior of a serial communication device, which is particularly useful for generating test conditions that are hard to reproduce with the original device (e.g. problem conditions).


 
Docklight Main Screen

Docklight - Simulating a serial device
 

Logging RS232 data - All serial communication data can be logged using two different file formats: use plain text format for fast logging and storing huge amounts of data. Or create a HTML file with styled text that lets you easily distinguish between incoming and outgoing data or additional information.



Detecting specific data sequences - In many test cases you will need to check for a specific sequence within the RS232 data that indicates a problem condition. Docklight manages a list of such data sequences for you and is able to perform user-defined actions after detecting a sequence, e.g. taking a snapshot of all communication data before and after the error message was received.

 
Docklight - Monitoring the serial communication between two devices
Docklight - Testing a serial device
 

Responding to incoming data - Docklight lets you specify user-defined answers to the different communication sequences received. This allows you to build a basic simulator for your serial device within a few minutes. It can also help you to trace a certain error by sending out a diagnostics command after receiving the error message.


Docklight will work with the COM communication ports provided by your Windows operating system. Physically, these ports will be RS232 SUB D9 interfaces in many cases. However, it is also possible to use Docklight for other communication standards such as RS485 and RS422, which have a different electrical design to RS232 but follow the RS232 communication mechanism.

Docklight has been successfully tested with a vast range of serial devices and drivers. This includes many popular USB-to-RS232 converters, Virtual Null Modem drivers like com0com, Bluetooth serial port and modem drivers, Arduino serial ports, and many other Embedded hardware devices that appear as a COM port in the Windows Device Manager.

For the software and manuals please refer to the download section. You can find Application Notes and examples for different hardware interfaces and protocols in our examples section.



Docklight Scripting

Docklight Scripting is an extended edition of Docklight RS232 Terminal / RS232 Monitor. It features an easy-to-use script language, plus a built-in editor to create and run automated test jobs. A Docklight script allows you to execute all basic Docklight functions (sending predefined data sequences, detecting specific sequences within the incoming data stream, ...) and embed them in your own test code.

 
Docklight Scripting Main Screen

Docklight Scripting is also network-enabled. Instead of using a serial COM port, Docklight Scripting can establish TCP connections (TCP client mode), accept a TCP connection on a local port (TCP server mode), or act as a UDP peer. See our Docklight TCP/UDP and Applications, Examples sections for an overview.

Docklight Scripting gives you both, flexibility and simplicity. Within minutes you can build your own automated testing tools and create:

  • repeated test cycles (e.g. endurance testing for a motion control / drive system)
  • time-controlled test jobs (e.g. sending a diagnostics command at certain times of day)
  • automatic device configuration scripts (e.g. resetting a RS232 device to factory defaults before delivery)
  • fault analysis tools for service and maintenance tasks (e.g. running a set of diagnostics commands and performing automatic fault analysis)
  • protocol testers with automatic checksum calculations (e.g. CRC - Cyclic Redundancy Codes)
  • Docklight startup scripts (e.g. automatically starting a COM port logging task at PC startup)

Docklight Scripting uses the VBScript engine, allowing you to write your tests in a simple and well-known script language. Docklight's basic functions and features are made available through a small and convenient set of script commands. The sample applications and scripts provided make getting started easy, and allow you to become productive immediately.

For the software and manuals please refer to the download section.


Docklight DLL

The Docklight DLL Automation API is a simple way to add Docklight-style communications (serial COM port, TCP or UDP, Send and Receive Sequences) to your Microsoft Excel workbook, Windows Script or Windows C#, C++, C or Java software application.

For documentation and download of the current pre-release version please see the Docklight DLL Automation FAQ. For licensing and pricing see our Docklight Order Information page.


Docklight Tap

Docklight Tap is a compact RS232 data tap solution for high performance, time critical monitoring via USB. It is especially designed to ensure low latency for the data capturing. The Docklight software supports the Docklight Tap - the Docklight Communication Mode "Monitoring" offers fast and direct access to the two Docklight Tap data directions. This allows full duplex RS232 monitoring applications with much higher accuracy compared to standard USB-to-Serial accessories.

Docklight Tap has three connectors:

Docklight Tap
  • Device 1 - SUB D9 Female, 1:1 link between Device 1 and Device 2
  • Device 2 - SUB D9 Male, 1:1 link between Device 1 and Device 2
  • USB Serial Converters A + B - Mini USB connector, monitoring communication of both directions with Docklight

Enclosed is a 1.8m Mini-B USB cable to connect the Docklight Tap to the PC.


Docklight Monitoring Tap - Application

For technical data and dimensions see our Docklight Tap product sheet.

For installation and use, see Application Note: Low Latency Monitoring with Docklight Tap.

For software drivers and additional documentation please refer to the download section.

Please note: The Docklight Tap is only available within the EU/Switzerland/Norway currently. If you are interested in purchasing a Docklight Tap from outside the EU, please contact our support at docklight@fuh-edv.de.



Docklight Tap Pro

Docklight Tap Pro is the monitoring solution for true milliseconds time measurements or monitoring of RS232 status lines along with the protocol data. Docklight Tap Pro provides the following additional features compared to the standard Docklight Tap:

  • Own hardware time base with internal accuracy 1µs, available Docklight display resolution 1ms.
  • RS232 status line monitoring (RTS/DTR/CTS/DSR/DCD/RI) in correct chronological order, along with the actual communication data.
  • Supports baud rates up to 921600 bps.
  • Supports 3.3V/5V TTL and RS232 voltage levels.

Connectors and cables are the same as for the Docklight Tap.

For technical data and dimensions see our Docklight Tap Pro product sheet.

For installation and use, see Application Note: Docklight Tap Pro and Docklight Tap 485 Support.

For software drivers and additional documentation please refer to the download section.

Please note: The Docklight Tap Pro is only available within the EU/Switzerland/Norway currently. If you are interested in purchasing a Docklight Tap Pro from outside the EU, please contact our support at docklight@fuh-edv.de.



Docklight RS232 Adapter

Docklight RS232 Adapter is a USB-to-RS232 adapter cable for standard RS232 communication using Docklight or Docklight Scripting. It guarantees trouble-free operation on all Windows versions currently supported by the Docklight software applications.

The Docklight RS232 Adapter is capable of communication rates from 300 Baud to 1 MBaud. It adds one RS232 / serial COM port by connecting to the USB.

The industry standard FTDI chipset and device drivers are supported by Windows Update and ensure maximum compatibility.

Docklight RS232 Adapter

Docklight RS232 Adapter has two connectors:

Cable length is 2.0m.

For detailed technical data and dimensions see our Docklight RS232 Adapter product sheet.

For installation and use, see Application Note: Docklight RS232 Adapter.

For software drivers and additional documentation please refer to the download section.

Please note: The Docklight RS232 adapter is only available within the EU/Switzerland/Norway currently.



Docklight Monitoring Cable

Docklight Monitoring Cable is a custom RS232 cable designed for the use with Docklight Monitoring Mode (full duplex monitoring). The cable follows the cable specification of the Docklight User Manual.

The Docklight Monitoring Cable has shielded ends and is an electrically and mechanically rugged solution for industrial applications.


The cable has four connectors:

Docklight Monitoring Cable
  • Device 1 - SUB D9 female, 1:1 link between Device 1 and Device 2
  • Device 2 - SUB D9 male, 1:1 link between Device 1 and Device 2
  • Monitor 1 - SUB D9 female, monitoring communication direction 1 with Docklight
  • Monitor 2 - SUB D9 female, monitoring communication direction 2 with Docklight

Docklight Monitoring Cable - Application

For technical data and dimensions please see our Docklight Monitoring Cable data sheet.

Please note: The Docklight Monitoring Cable is only available within the EU/Switzerland/Norway currently. Please see our FAQ section on alternative solutions.


back back to the Docklight main page